-
1 условия эксплуатации
1) General subject: installed conditions (напр. IEC 60534-2-1 Flow capacity - Sizing equations for fluid flow under installed conditions - Пропускная способность. Уравнения измерения потока для текучих сред в условиях эксплуатации)2) Computers: operation condition, working condition3) Aviation: in-service environment4) Military: condition of service5) Engineering: application environment, environment, external environment, operating conditions, operation conditions, operational conditions, operational environment, running conditions, service conditions, service environment, usage conditions, working conditions, environmental specifications6) Construction: application conditions7) Economy: operative conditions8) Automobile industry: actual operating conditions, average operating conditions, conditions of usage, operational circumstances9) Mining: service conditions (машины, механизма, сооружения)10) Forestry: treatment11) Telecommunications: conditions of service12) Oil: environmental conditions, field conditions, in-use conditions, operating conditions (оборудования), operating environment, set of operating conditions, use environment13) Metrology: normal conditions14) Mechanics: run-time environment15) Advertising: work environment, working environment16) Oilfield: production conditions (скважины)17) Quality control: application characteristics, operating condition, operative condition, use conditions18) General subject: use (колонка в таблице)19) Makarov: duty, environment (оборудования), exposure (для красок, лаков и т.п.)20) Electrical engineering: maintenance conditions21) Cellular communications: conditions of useУниверсальный русско-английский словарь > условия эксплуатации
-
2 условия эксплуатации (электрооборудования)
- working condition
- use environment
- usage conditions
- set of operating conditions
- service environment
- service conditions
- running conditions
- operational environment
- operational conditions
- operation conditions
- operating conditions
- operating condition
- in-use conditions
- field conditions
- external environment
- environmental service conditions
- environment
- EE
- conditions of usage
- application environment
- application conditions
условия эксплуатации
Совокупность значений внешних воздействующих факторов, которые во время эксплуатации электротехнического изделия (электротехнического устройства, электрооборудования) могут на него влиять.
[ ГОСТ 18311-80]КЛАССИФИКАЦИЯ (по ГОСТ Р МЭК 61439-1-2012)
-
Условия эксплуатации:
-
Нормальные условия эксплуатации:
-
температура окружающей среды:
- при внутренней установке (при установке внутри помещения);
- при наружной установке (при установке вне помещения);
-
атмосферные условия:
- относительная влажность воздуха;
- степень загрязнения;
- высота над уровнем моря;
-
температура окружающей среды:
-
Особые условия эксплуатации:
- значения температуры окружающей среды, относительной алжности воздуха, высоты над уровнем моря, отличающиеся от нормальных условий эксплуатации;
- места установки, в которых температура окружающей среды и/или атмосферное давление могут изменяться так быстро, что внутри НКУ будет происходить образование конденсата в значительном количестве;
- сильное загрязнение воздуха пылью; наличие в воздухе дыма, коррозионных или радиоактивных частиц, испарений или соли;
- воздействие сильных электрических или магнитных полей;
- воздействие экстремальных климатических условий;
- образование плесени или воздействие микроорганизмов;
- установка в пожаро- или взрывоопасных местах;
- воздействие сильной вибрации или ударов;
- способ установки, приводящий к снижению допустимых токовых нагрузок или отключающей способности устройств, например, встаривание в машину или нишу в стене;
- воздействие наведенных или излучаемых помех, кроме электромагнитных и электромагнитных помех, кроме указанных в п. 9.4;
- повышеннные перенапряжения.
-
Нормальные условия эксплуатации:
НКУ должно эксплуатироваться в нормальных условиях эксплуатации.
НКУ, соответствующие требованиям настоящего стандарта, должны эксплуатироваться в указанных ниже условиях....
6.1.1 Температура окружающего воздуха
6.1.1.1 Температура окружающего воздуха при внутренней установке...
6.1.1.2 Температура окружающего воздуха при наружной установке...6.1.2 Атмосферные условия
6.1.2.1 Атмосферные условия при установке внутри помещений...
6.1.2.2 Атмосферные условия при наружной установке...6.1.2.3 Степень загрязнения...
6.1.3 Высота над уровнем моря мест установки...
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
Параллельные тексты EN-RU
The operation characteristic of Molded Case Circuit Breaker including short-circuit, overload, endurance and insulation is often influenced largely by external environment and thus should be applied appropriately with conditions of the place where it is used taken into consideration.
[LS Industrial Systems]Рабочие характеристики автоматического выключателя в литом корпусе, такие, как срабатывание защиты от короткого замыкания и перегрузки, коммутационная износостойкость и изоляционное расстояние, часто в значительной степени зависят от окружающей среды. Поэтому при установке выключателя необходимо учитывать условия, существующие в месте предстоящей эксплуатации выключателя.
[Перевод Интент]
Тематики
- НКУ (шкафы, пульты,...)
- эксплуатация электроустановок
Действия
Синонимы
Сопутствующие термины
- более жесткие условия эксплуатации
- более легкие условия эксплуатации
- допустимые условия эксплуатации
- жесткость условий эксплуатации
- номинальные условия эксплуатации
- нормальные условия эксплуатации
- особые условия эксплуатации
- самые тяжелые из предусмотренных условий эксплуатации
- тяжелые условия эксплуатации
EN
- application conditions
- application environment
- conditions of usage
- EE
- environment
- environmental service conditions
- external environment
- field conditions
- in-use conditions
- operating condition
- operating conditions
- operation conditions
- operational conditions
- operational environment
- running conditions
- service conditions
- service environment
- set of operating conditions
- usage conditions
- use environment
- working condition
Русско-английский словарь нормативно-технической терминологии > условия эксплуатации (электрооборудования)
-
3 условия применения
1) Military: applicability2) Engineering: application conditions (характерные)3) Mining: conditions of use (системы разработки)4) Metallurgy: conditions of use5) Telecommunications: conditions of usage6) Oil: use environment7) Advertising: application environment, service environment8) Automation: conditions of practical applicationУниверсальный русско-английский словарь > условия применения
-
4 условия использования
1) General subject: limit of use2) Law: (информации) Terms of Use3) Economy: use conditions4) Metallurgy: conditions of use5) Information technology: use environment6) Quality control: conditions of usageУниверсальный русско-английский словарь > условия использования
-
5 ремонтопригодность
ремонтопригодность
Свойство объекта, заключающееся в приспособленности к поддержанию и восстановлению работоспособного состояния путем технического обслуживания и ремонта.
[ ГОСТ 27.002-89]
ремонтопригодность
Свойство объекта, заключающееся в его приспособленности при заданных условиях эксплуатации к поддержанию или восстановлению состояния, в котором он способен выполнять требуемую функцию, путем проведения технического обслуживания и ремонта, выполняемых с использованием установленых процессов и ресурсов.
[ОСТ 45.152-99]
ремонтопригодность
Свойство товара, заключающееся в приспособлении к предупреждению причин возникновения отказов, сбоев, поддержанию работоспособного состояния путем проведения техобслуживания и ремонтов.
[ ГОСТ Р 52104-2003]
ремонтопригодность
По ГОСТ 27. 002-89
В соответствии с ГОСТ 27.002-89 под ремонтопригодностью понимается "свойство объекта, заключающееся в приспособленности к предупреждению и обнаружению причин возникновения его отказов, повреждений и устранению их путем проведения ремонтов и технического обслуживания". При этом следует иметь в виду, что приспособленность объекта к плановым ремонтам относится к его ремонтопригодности.
[ ГОСТ 21623-76]EN
maintainability (performance)
the ability of an item under given conditions of use, to be retained in, or restored to, a state in which it can perform a required function, when maintenance is performed under given conditions and using stated procedures and resources
NOTE – The term "maintainability" is also used as a measure of maintainability performance.
[IEV number 191-02-07]
maintainability
the probability that a given active maintenance action, for an item under given conditions of use can be carried out within a stated time interval, when the maintenance is performed under stated conditions and using stated procedures and resources
NOTE – The term "maintainability" is also used to denote the maintainability performance quantified by this probability.
Source: see 191-02-07
[IEV number 191-13-01]FR
maintenabilité
dans des conditions données d'utilisation, aptitude d'une entité à être maintenue ou rétablie dans un état dans lequel elle peut accomplir une fonction requise, lorsque la maintenance est accomplie dans des conditions données, avec des procédures et des moyens prescrits
NOTE – Le terme "maintenabilité" est aussi employé comme caractéristique de cette aptitude.
[IEV number 191-02-07]
maintenabilité
pour une entité donnée, utilisée dans des conditions données d'utilisation, probabilité pour qu'une opération donnée de maintenance active puisse être effectuée pendant un intervalle de temps donné, lorsque la maintenance est assurée dans des conditions données et avec l'utilisation de procédures et de moyens prescrits
NOTE – Le terme "maintenabilité" est aussi employé pour désigner l'aptitude caractérisée par cette probabilité.
Source: voir 191-02-07
[IEV number 191-13-01]Тематики
- надежность, основные понятия
- ресурсосбережение, обращение с отходами
- система техн. обслуж. и ремонта техники
- тех. обсл. и ремонт средств электросвязи
Обобщающие термины
EN
DE
FR
1.4. Ремонтопригодность
Maintainability
Свойство объекта, заключающееся в приспособленности к поддержанию и восстановлению работоспособного состояния путем технического обслуживания и ремонта
Источник: ГОСТ 27.002-89: Надежность в технике. Основные понятия. Термины и определения оригинал документа
3.38 ремонтопригодность (maintainability): Вероятность того, что конкретная операция по обслуживанию устройства в данных условиях эксплуатации может быть выполнена в заранее определенный период времени, в заранее определенных условиях с использованием заранее определенных операций и средств.
[МЭК 60987, пункт 2.10, модифицировано]
Источник: ГОСТ Р МЭК 61513-2011: Атомные станции. Системы контроля и управления, важные для безопасности. Общие требования оригинал документа
Русско-английский словарь нормативно-технической терминологии > ремонтопригодность
-
6 условия эксплуатации
* * *field conditions, in-use conditions, ( оборудования) operating conditions, running conditions, service conditions, operating environment, operational environment, service environment, use environment, set of operating conditionsРусско-английский словарь по нефти и газу > условия эксплуатации
-
7 принципы комплексной безопасности
принципы комплексной безопасности
-
[Директива 98/37/ЕЭС по машинному оборудованию]Параллельные тексты EN-RU
1.2.2. Principles of safety integration
(a) Machinery must be so constructed that it is fitted for its function, and can be adjusted and maintained without putting persons at risk when these operations are carried out under the conditions foreseen by the manufacturer.
The aim of measures taken must be to eliminate any risk of accident throughout the foreseeable lifetime of the machinery, including the phases of assembly and dismantling, even where risks of accident arise from foreseeable abnormal situations.
(b) In selecting the most appropriate methods, the manufacturer must apply the following principles, in the order given:
— eliminate or reduce risks as far as possible (inherently safe machinery design and construction),
— take the necessary protection measures in relation to risks that cannot be eliminated,
— inform users of the residual risks due to any shortcomings of the protection measures adopted, indicate whether any particular training is required and specify any need to provide personal protection equipment.
(c) When designing and constructing machinery, and when drafting the instructions, the manufacturer must envisage not only the normal use of the machinery but also uses which could reasonably be expected.
The machinery must be designed to prevent abnormal use if such use would engender a risk.In other cases the instructions must draw the user’s attention to ways — which experience has shown might occur — in which the machinery should not be used.
(d) Under the intended conditions of use, the discomfort, fatigue and psychological stress faced by the operator must be reduced to the minimum possible taking ergonomic principles into account.
(e) When designing and constructing machinery, the manufacturer must take account of the constraints to which the operator is subject as a result of the necessary or foreseeable use of personal protection equipment (such as footwear, gloves, etc.).
(f) Machinery must be supplied with all the essential special equipment and accessories to enable it to be adjusted, maintained and used without risk.
[DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL]
1.1.2. Принципы комплексной безопасности.
(a) Машинное оборудование должно конструироваться так, чтобы оно выполняло заранее предусмотренные функции, и чтобы была возможность производить их наладку и техническое обслуживание, не подвергая персонал риску во время осуществления этих операций в условиях, предусмотренных изготовителем.
Целью принимаемых мер является устранение любого риска несчастного случая в течение прогнозируемого периода срока службы машинного оборудования, включая фазы сборки и демонтажа, а также когда несчастный случай может произойти вследствие возникновения чрезвычайных обстоятельств, которые невозможно было предвидеть заранее.
(b) Выбирая наиболее подходящие меры, изготовитель должен применять следующие принципы в указанном порядке:
- по возможности устранить или сократить риски (сделать изначально безопасными как конструкцию, так и собранное машинное оборудование);
- принять все необходимые меры защиты против рисков, которые не могут быть устранены;
- информировать пользователей о возможных остаточных рисках, которые могут иметь место из-за недостаточности принятых мер защиты, с описанием всей необходимой специальной подготовки персонала и всех средств личной защиты, которыми его необходимо снабдить.
(c) При конструировании и производстве машинного оборудования, а также при составлении инструкций изготовитель должен предусмотреть не только обычное использование машинного оборудования, но и потенциальное его использование.
Машинное оборудование должно быть сконструировано таким образом, чтобы предотвратить ненадлежащее его использование, если оно повлечет за собой возникновение риска. В прочих случаях инструкции должны обратить внимание пользователя на то, каким образом машинное оборудование не следует использовать (на основании уже имеющегося опыта).
(d) При надлежащих условиях использования необходимо сократить до минимума всевозможные неудобства, чувство усталости и психологического стресса, которые испытывает оператор, принимая при этом в расчет принципы эргономики.
(e) При конструировании и производстве машинного оборудования изготовитель обязан принимать во внимание скованность и ограниченность движений оператора, которые являются следствием необходимых или предусмотренных средств личной защиты (таких как специальная обувь, перчатки и т.п.).
(f) Машинное оборудование должно быть снабжено всем основным специальным оборудованием, необходимым для пуска, текущего обслуживания и безопасного использования.
[Официальный перевод]Тематики
EN
Русско-английский словарь нормативно-технической терминологии > принципы комплексной безопасности
-
8 эксплуатационные условия
1) General subject: working conditions2) Computers: operation condition, working condition3) Aviation: serviceable conditions4) Military: conditions of use5) Engineering: field environment6) Automobile industry: running conditions7) Information technology: operation conditions, service conditions8) Oil: operating conditions9) Coolers: operating regime, running regime10) Drilling: operative conditions11) Oil&Gas technology field conditions12) Programming: operational conditionsУниверсальный русско-английский словарь > эксплуатационные условия
-
9 отключающая способность (коммутационного аппарата или плавкого предохранителя)
- rupture rupturing capacity
- rupture capacity
- interrupting capacity
- interrupting capability
- IC
- breaking current capacity
- breaking capacity (of a switching device or a fuse)
- breaking capacity
- BC
отключающая способность (коммутационного аппарата или плавкого предохранителя)
Значение ожидаемого тока отключения, который способен отключать коммутационный аппарат или плавкий предохранитель при установленном напряжении в предписанных условиях эксплуатации и поведения.
Примечания
1 Напряжение устанавливается и условия предписываются в стандарте на соответствующий аппарат.
2 Для переменного тока это симметричное действующее значение периодической составляющей.
МЭК 60050(441-17-08)
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]
отключающая способность (коммутационного аппарата или предохранителя)
Значение ожидаемого тока отключения, который коммутационный аппарат или предохранитель способен отключить при заданном напряжении в предписанных условиях применения и поведения.
Примечание - Для коммутационных аппаратов отключающая способность может быть определена в соответствии с видом тока, предусмотренного в предписанных условиях, например отключающая способность при отключении ненагруженной линии, отключающая способность при отключении ненагруженного кабеля, отключающая способность при отключении одиночной конденсаторной батареи и т. д
[ ГОСТ Р 52726-2007]
отключающая способность коммутационного аппарата
Коммутационная способность коммутационного аппарата при отключении цепи.
[ ГОСТ 17703-72]EN
breaking capacity (of a switching device or a fuse)
a value of prospective current that a switching device or a fuse is capable of breaking at a stated voltage under prescribed conditions of use and behaviour
NOTE 1 – The voltage to be stated and the conditions to be prescribed are dealt with in the relevant publications.
NOTE 2 – For switching devices, the breaking capacity may be termed according to the kind of current included in the prescribed conditions, e.g. line-charging breaking capacity, cable charging breaking capacity, single capacitor bank breaking capacity, etc.
[IEV number 441-17-08]
[IEV number 441-01-49]FR
pouvoir de coupure (d'un appareil de connexion ou d'un fusible)
une valeur de courant présumé qu'un appareil de connexion ou un fusible est capable d'interrompre sous une tension fixée dans des conditions prescrites d'emploi et de comportement
NOTE 1 – La tension à fixer et les conditions à prescrire sont précisées dans les publications particulières.
NOTE 2 – Pour les appareils de connexion, le pouvoir de coupure peut être dénommé suivant le type de courant intervenant dans les conditions prescrites, par exemple: pouvoir de coupure de lignes à vide, pouvoir de coupure de câbles à vide, pouvoir de coupure d'une batterie de condensateurs unique, etc.
[IEV number 441-17-08]
[IEV number 441-01-49]
Недопустимые, нерекомендуемые
Примечание(1)- Мнение автора карточкиТематики
- выключатель автоматический
- выключатель, переключатель
- высоковольтный аппарат, оборудование...
Синонимы
EN
- BC
- breaking capacity
- breaking capacity (of a switching device or a fuse)
- breaking current capacity
- IC
- interrupting capability
- interrupting capacity
- rupture capacity
- rupture rupturing capacity
DE
FR
Русско-английский словарь нормативно-технической терминологии > отключающая способность (коммутационного аппарата или плавкого предохранителя)
-
10 длительный допустимый ток
(длительный) допустимый ток
Максимальное значение электрического тока, который может протекать длительно по проводнику, устройству или аппарату при определенных условиях без превышения определенного значения их температуры в установившемся режиме
[ ГОСТ Р МЭК 60050-826-2009]
Этот ток обозначают IZ
[ ГОСТ Р 50571. 1-2009 ( МЭК 60364-1: 2005)]EN
(continuous) current-carrying capacity
ampacity (US)
maximum value of electric current which can be carried continuously by a conductor, a device or an apparatus, under specified conditions without its steady-state temperature exceeding a specified value
[IEV number 826-11-13]
ampacity
The current in amperes that a conductor can carry continuously under the conditions of use without exceeding its temperature rating.
[National Electrical Cod]FR
courant (permanent) admissible, m
valeur maximale du courant électrique qui peut parcourir en permanence, un conducteur, un dispositif ou un appareil, sans que sa température de régime permanent, dans des conditions données, soit supérieure à la valeur spécifiée
[IEV number 826-11-13]Ampacity, the term is defined as the maximum amount of current a cable can carry before sustaining immediate or progressive deterioration. Also described as current rating or current-carrying capacity, is the RMS electric current which a device can continuously carry while remaining within its temperature rating. The ampacity of a cable depends on:
- its insulation temperature rating;
- conductor electrical properties for current;
- frequency, in the case of alternating currents;
- ability to dissipate heat, which depends on cable geometry and its surroundings;
- ambient temperature.
Electric wires have some resistance, and electric current flowing through them causes voltage drop and power dissipation, which heats the cable. Copper or aluminum can conduct a large amount of current before melting, but long before the conductors melt, their insulation would be damaged by the heat.
The ampacity for a power cable is thus based on physical and electrical properties of the material & construction of the conductor and of its insulation, ambient temperature, and environmental conditions adjacent to the cable. Having a large overall surface area may dissipate heat well if the environment can absorb the heat.
In a long run of cable, different conditions govern, and installation regulations normally specify that the most severe condition along the run governs the cable's rating. Cables run in wet or oily locations may carry a lower temperature rating than in a dry installation. Derating is necessary for multiple circuits in close proximity. When multiple cables are near, each contributes heat to the others and diminishes the amount of cooling air that can flow past the individual cables. The overall ampacity of the insulated conductors in a bundle of more than 3 must be derated, whether in a raceway or cable. Usually the de-rating factor is tabulated in a nation's wiring regulations.
Depending on the type of insulating material, common maximum allowable temperatures at the surface of the conductor are 60, 75 and 90 degrees Celsius, often with an ambient air temperature of 30°C. In the U.S., 105°C is allowed with ambient of 40°C, for larger power cables, especially those operating at more than 2 kV. Likewise, specific insulations are rated 150, 200 or 250°C.
The allowed current in cables generally needs to be decreased (derated) when the cable is covered with fireproofing material.
For example, the United States National Electric Code, Table 310-16, specifies that up to three 8 AWG copper wires having a common insulating material (THWN) in a raceway, cable, or direct burial has an ampacity of 50 A when the ambient air is 30°C, the conductor surface temperature allowed to be 75°C. A single insulated conductor in air has 70 A rating.
Ampacity rating is normally for continuous current, and short periods of overcurrent occur without harm in most cabling systems. The acceptable magnitude and duration of overcurrent is a more complex topic than ampacity.
When designing an electrical system, one will normally need to know the current rating for the following:- Wires
- Printed Circuit Board traces, where included
- Fuses
- Circuit breakers
- All or nearly all components used
Some devices are limited by power rating, and when this power rating occurs below their current limit, it is not necessary to know the current limit to design a system. A common example of this is lightbulb holders.
[http://en.wikipedia.org/wiki/Ampacity]
Тематики
- электротехника, основные понятия
Синонимы
EN
DE
- Dauerstrombelastbarkeit, f
- Strombelastbarkeit, f
FR
- courant admissible, m
- courant permanent admissible, m
Русско-английский словарь нормативно-технической терминологии > длительный допустимый ток
-
11 включающая способность (коммутационного аппарата)
включающая способность (коммутационного аппарата)
Значение ожидаемого тока включения, который способен включать коммутационный аппарат при установленном напряжении в предписанных условиях эксплуатации и поведения.
Примечание
Напряжение устанавливается и условия предписываются в стандарте на соответствующий аппарат.
МЭК 60050(441-17-09)
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]
включающая способность коммутационного аппарата
Коммутационная способность коммутационного аппарата при включении цепи.
[ ГОСТ 17703-72]EN
making capacity (of a switching device or a fuse)
a value of prospective making current that a switching device is capable of making at a stated voltage under prescribed conditions of use and behaviour
NOTE – The voltage to be stated and the conditions to be prescribed are dealt with in the relevant specifications.
[IEV number 441-17-09]
[IEV number 442-01-48]FR
pouvoir de fermeture (d'un appareil de connexion)
une valeur du courant présumé établi qu'un appareil de connexion est capable d'établir sous une tension donnée et dans des conditions prescrites d'emploi et de comportement
NOTE – La tension à fixer et les conditions à prescrire sont précisées dans les spécifications individuelles
[IEV number 441-17-09]
[IEV number 442-01-48]
Тематики
- аппарат, изделие, устройство...
- выключатель автоматический
- выключатель, переключатель
- предохранитель
EN
DE
FR
Русско-английский словарь нормативно-технической терминологии > включающая способность (коммутационного аппарата)
-
12 категория применения (коммутационного аппарата или плавкого предохранителя)
категория применения( коммутационного аппарата или плавкого предохранителя)
Комбинация определенных требований, отнесенных к состоянию, в котором коммутационный аппарат или плавкий предохранитель выполняет свои функции, отобранных в качестве типичных для характерной группы практических применений.
Примечание. Требования могут затрагивать, например, значения включающей способности (при ее наличии), отключающей способности и другие характеристики, подключенные цепи, условия эксплуатации и поведение.
МЭК 60050(441-17-19)
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]EN
utilization category (for a switching device or a fuse)
a combination of specified requirements related to the condition in which the switching device or the fuse fulfils its purpose, selected to represent a characteristic group of practical applications
NOTE – The specified requirements may concern e.g. the values of making capacities (if applicable), breaking capacities and other characteristics, the associated circuits and the relevant conditions of use and behaviour.
[IEV number 441-17-19]FR
catégorie d'emploi (pour un appareil de connexion ou un fusible)
ensemble de prescriptions spécifiées relatives aux conditions dans lesquelles l'appareil de connexion ou le fusible doit remplir son office, choisies pour représenter un groupe caractéristique d'applications pratiques
NOTE – Les prescriptions spécifiées peuvent concerner, par exemple, les valeurs des pouvoirs de fermeture, s'il y a lieu, les valeurs des pouvoirs de coupure et d'autres caractéristiques, les circuits associés et les conditions correspondantes d'emploi et de comportement.
[IEV number 441-17-19]Недопустимые, нерекомендуемые
Примечание(1)- Мнение автора карточкиТематики
- аппарат, изделие, устройство...
EN
DE
FR
Русско-английский словарь нормативно-технической терминологии > категория применения (коммутационного аппарата или плавкого предохранителя)
-
13 дифференциальная включающая и отключающая способность
дифференциальная включающая и отключающая способность
-
[IEV number 442-05-27]EN
residual making and breaking capacity
a value of the alternating component of a residual prospective current which a residual current device can make, carry for its opening time and break under specified conditions of use and behaviour
[IEV number 442-05-27]FR
pouvoir de fermeture et de coupure différentiel
valeur de la composante alternative du courant différentiel présumé qu'un dispositif de coupure différentiel est capable d'établir, de supporter pendant son temps de déclenchement et d'interrompre dans des conditions prescrites d'emploi et de comportement
[IEV number 442-05-27]Тематики
- электротехника, основные понятия
EN
DE
FR
Русско-английский словарь нормативно-технической терминологии > дифференциальная включающая и отключающая способность
-
14 кратковременно допустимый ток
кратковременно допустимый ток
Ток, который цепь или коммутационный аппарат способны проводить в замкнутом положении в течение установленного кратковременного периода в заданных условиях эксплуатации и поведения.
МЭК 60050(441-17-17).
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]EN
short-time withstand current
the current that a circuit or a switching device in the closed position can carry during a specified short time under prescribed conditions of use and behaviour
[IEV number 441-17-17]FR
courant de courte durée admissible
courant qu'un circuit ou un appareil de connexion dans la position de fermeture peut supporter pendant un court intervalle de temps spécifié et dans des conditions prescrites d'emploi et de comportement
[IEV number 441-17-17]Тематики
- электротехника, основные понятия
EN
DE
FR
Русско-английский словарь нормативно-технической терминологии > кратковременно допустимый ток
-
15 пиковый допустимый ток
пиковый допустимый ток
Значение пикового тока, который может выдерживать цепь или коммутационный аппарат в замкнутом положении в заданных условиях эксплуатации и поведения.
МЭК 60050(441-17-18).
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]EN
peak withstand current
the value of peak current that a circuit or a switching device in the closed position can withstand under prescribed conditions of use and behaviour
[IEV number 441-17-18]FR
valeur de crête du courant admissible
valeur de crête du courant qu'un circuit ou un appareil de connexion dans la position de fermeture peut supporter dans des conditions prescrites d'emploi et de comportement
[IEV number 441-17-18]Тематики
- электротехника, основные понятия
EN
DE
FR
Русско-английский словарь нормативно-технической терминологии > пиковый допустимый ток
-
16 трансформатор тока
трансформатор тока
Трансформатор, в котором при нормальных условиях применения вторичный ток практически пропорционален первичному току и при правильном включении сдвинут относительно него по фазе на угол, близкий к нулю.
[ ГОСТ 18685-73]
трансформатор тока
Трансформатор, сигнал на выходе которого пропорционален входному току. [МЭС 321-02-01, измененный ]
Примечание
Катушка Роговского с интегрирующей цепью представляет собой широкополосный трансформатор тока.
[МЭК 60-2]EN
current transformer
an instrument transformer in which the secondary current, in normal conditions of use, is substantially proportional to the primary current and differs in phase from it by an angle which is approximately zero for an appropriate direction of the connections
[IEV number 321-02-01]FR
transformateur de courant
transformateur de mesure dans lequel le courant secondaire est, dans les conditions normales d'emploi, pratiquement proportionnel au courant primaire et déphasé par rapport à celui-ci d'un angle approximativement nul pour un sens approprié des connexions
[IEV number 321-02-01]... электромагнитные трансформаторы тока (далее — трансформаторы) на номинальное напряжение от 0,66 до 750 кВ включительно, предназначенные для передачи сигнала измерительной информации приборам измерения, защиты, автоматики, сигнализации и управления в электрических цепях переменного тока частотой 50 или 60 Гц.
[ ГОСТ 7746-2001]Параллельные тексты EN-RU
Inductive current transformers (CT) step the operating currents and short-circuit currents down to values which are suitable for measuring instruments and protective devices connected.
[Siemens]Электромагнитные трансформаторы тока понижают значение рабочих токов и токов короткого замыкания до значений, приемлемых для измерительных приборов и устройств защиты.
[Перевод Интент]Тематики
Классификация
>>>Обобщающие термины
Синонимы
- ТТ
EN
DE
FR
Русско-английский словарь нормативно-технической терминологии > трансформатор тока
-
17 условный дифференциальный ток короткого замыкания
условный дифференциальный ток короткого замыкания
-
[IEV number 442-05-22]EN
conditional residual short-circuit current
value of the a.c. component of a residual prospective current which a residual current device without integral short-circuit protection, but protected by a short-circuit protective device in series, can withstand under specified conditions of use and behaviour
[IEV number 442-05-22]FR
courant différentiel conditionnel de court-circuit
valeur de la composante alternative du courant différentiel présumé qu'un dispositif de coupure différentiel, sans protection incorporée contre les courts-circuits, mais protégé par un dispositif de protection en série, peut supporter dans des conditions spécifiées d'emploi et de comportement
[IEV number 442-05-22]Тематики
EN
DE
FR
3.4.9 условный дифференциальный ток короткого замыкания (conditional residual short-circuit current): Значение переменной составляющей ожидаемого дифференциального тока, который УЗО без встроенной защиты от сверхтоков, но защищенное последовательно включенным подходящим УЗКЗ, способно выдерживать в заданных условиях эксплуатации.
[МЭК 60050 (442-05-28), модифицированный]
Источник: ГОСТ Р МЭК 60755-2012: Общие требования к защитным устройствам, управляемым дифференциальным (остаточным) током оригинал документа
Русско-английский словарь нормативно-технической терминологии > условный дифференциальный ток короткого замыкания
-
18 условный ток короткого замыкания
условный ток короткого замыкания
-
[IEV number 442-05-28]EN
conditional short-circuit current (for a residual current device)
a value of the alternating component of a prospective current, which a residual current device without integral short-circuit protection, but protected by a short-circuit protective device in series, can withstand under specified conditions of use and behaviour
[IEV number 442-05-28]FR
courant conditionnel de court-circuit (pour un dispositif de coupure différentiel)
valeur de la composante alternative du courant présumé qu'un dispositif de coupure différentiel, sans protection incorporée contre les courts-circuits, mais protégé par un dispositif de protection contre les courts-circuits en série, peut supporter dans des conditions prescrites d'emploi et de comportement
[IEV number 442-05-28]Тематики
- электробезопасность
- электротехника, основные понятия
EN
DE
FR
- courant conditionnel de court-circuit (pour un dispositif de coupure différentiel)
3.4.8 условный ток короткого замыкания (conditional short-circuit current): Значение переменной составляющей ожидаемого тока, который УЗО без встроенной защиты от сверхтоков, но защищенное последовательно включенным подходящим устройством защиты от коротких замыканий (далее - УЗКЗ), способно выдерживать в заданных условиях эксплуатации.
[МЭК 60050 (442-05-28), модифицированный]
Источник: ГОСТ Р МЭК 60755-2012: Общие требования к защитным устройствам, управляемым дифференциальным (остаточным) током оригинал документа
Русско-английский словарь нормативно-технической терминологии > условный ток короткого замыкания
-
19 условный ток короткого замыкания (в цепи или коммутационном аппарате)
условный ток короткого замыкания (в цепи или коммутационном аппарате)
Ожидаемый ток, который цепь или коммутационнный аппарат, защищенные установленным устройством от коротких замыканий, способны удовлетворительно выдерживать в течение всего времени срабатывания этого устройства в указанных условиях эксплуатации и поведения.
Примечания
1 В настоящем стандарте устройством для защиты от коротких замыканий служит, как правило, автоматический выключатель или плавкие предохранители.
2 Это определение отличается от МЭК 60050(441-17-20) расширением понятия токоограничивающего аппарата до устройства для защиты от коротких замыканий, функция которого не сводится только к токоограничению.
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]EN
conditional short-circuit current (of a circuit or a switching device)
the prospective current that a circuit or a switching device, protected by a specified current limiting device, can satisfactorily withstand for the operating time of that current limiting device under specified conditions of use and behaviour
[IEV number 441-17-20]FR
courant de court-circuit conditionnel (d'un circuit ou d'un appareil de connexion)
courant présumé qu'un circuit ou un appareil de connexion, protégé par un dispositif limiteur de courant spécifié, peut supporter de façon satisfaisante pendant la durée de fonctionnement de cet appareil limiteur de courant dans des conditions spécifiées d'emploi et de comportement
[IEV number 441-17-20]Тематики
- выключатель автоматический
- выключатель, переключатель
- предохранитель
- электротехника, основные понятия
EN
DE
FR
- courant de court-circuit conditionnel (d'un circuit ou d'un appareil de connexion)
Русско-английский словарь нормативно-технической терминологии > условный ток короткого замыкания (в цепи или коммутационном аппарате)
-
20 условный ток короткого замыкания выходной цепи
условный ток короткого замыкания выходной цепи
-
[IEV number 445-04-02]EN
conditional short-circuit current of an output circuit
prospective electric current that a contact circuit, protected by a specified short-circuit protective device, can satisfactorily withstand for the total breaking time of that protective device under specified conditions of use and behaviour
Source: IEC 60947-1 MOD
[IEV number 445-04-02]FR
courant de court-circuit conditionnel d'un circuit de sortie, m
courant électrique présumé qu'un circuit de contact, protégé par un dispositif de protection spécifié contre les courts-circuits, est capable de supporter de manière satisfaisante pendant la durée de coupure totale de ce dispositif de protection dans des conditions spécifiées d'utilisation et de comportement
Source: CEI 60947-1 MOD
[IEV number 445-04-02]Тематики
- электротехника, основные понятия
EN
DE
FR
Русско-английский словарь нормативно-технической терминологии > условный ток короткого замыкания выходной цепи
См. также в других словарях:
CONDITIONS — (Heb. תְּנָאִים, tena im). Definition Conditions is an ambiguous word inasmuch as it refers not only to the external factors upon which the existence of an agreement is made to depend but also to the actual terms of the contract itself. Thus, one … Encyclopedia of Judaism
use — 1 / yüs/ n 1 a: an arrangement in which property is granted to another with the trust and confidence that the grantor or another is entitled to the beneficial enjoyment of it see also trust; statute of uses in the important laws section ◇ Uses… … Law dictionary
Use of Wealth — Use of Wealth † Catholic Encyclopedia ► Use of Wealth The term wealth is not used here in the technical sense in which it occurs in treatises on economic subjects, but rather in its common acceptation, synonymous with riches. The… … Catholic encyclopedia
Use case — A use case is a description of a system’s behaviour as it responds to a request that originates from outside of that system.The use case technique is used in software and systems engineering to capture the functional requirements of a system. Use … Wikipedia
Conditions of Fitness — A London Taxi Company TX4 taxi, designed to conform with the Conditions of Fitness. The Conditions of Fitness set out the requirements for vehicles that may be used as licensed Hackney carriage taxi cabs in London. They are governed by Transport… … Wikipedia
Use case diagram — A use case diagram is a type of behavioral diagram defined by the Unified Modeling Language (UML) and created from a Use case analysis. Its purpose is to present a graphical overview of the functionality provided by a system in terms of actors,… … Wikipedia
Use of performance-enhancing drugs in sport — The use of performance enhancing drugs in sport is commonly referred to by the term doping , particularly by those organizations that regulate competitions. The use of performance enhancing drugs is mostly done to improve athletic performance.… … Wikipedia
Use of DNA in forensic entomology — Forensic science Physiological sciences … Wikipedia
Subsurface use licensing — is getting government authorization in the form of a license that certifies its holder s right to use a subsurface area within defined boundaries, with specified goals, terms and conditions of use. Discovered deposits and prospective areas form… … Glossary of Oil and Gas
Standard conditions for temperature and pressure — Not to be confused with Standard state. In chemistry, standard condition for temperature and pressure (informally abbreviated as STP) are standard sets of conditions for experimental measurements, to allow comparisons to be made between different … Wikipedia
drug use — Introduction use of drugs for psychotropic rather than medical purposes. Among the most common psychotropic drugs are opiates ( opium, morphine, heroin), hallucinogens (LSD, mescaline, psilocybin), barbiturates, cocaine, amphetamines,… … Universalium